




Overview
The Messerchmitt ME-262 was developed by the Germans during the later part of WWII. It was the first operational jet fighter in the world.
Dynam replicates the full size to bring you a scale EPO foam recreation of the Me262 PRO 6S. Twin 70mm ducted fans supported by twin 60A speed controllers easily propel this jet to adrenaline pumping speeds. Even better is that only a single 22.2V 5000mAh battery is required to support this monster of a power plant. The steerable nose wheel and worm drive retracts allow the landing gears to retract slowly providing that touch of realism. The control horns, ducted fans, and servos are pre-installed which makes the plane simple and quick to build.
Key Features
- Realistic scale features including bright gray camo paint scheme and decals, hand painted pilot figure, and molded panel lines
- 1500mm wingspan for great ascensional force and the ability to climb to high altitudes
- Electronic retractable landing gear
- Powerful 70mm electronic ducted fan units
Technical Specifications
| Item ID | DY8950 |
| Model | ME-262 |
| Material | EPO Foam |
| Wing Span | 1500mm (59in) |
| Flying Weight | 2650g (93.5oz) |
| Wing Loading | 70.9g/dm² |
| Fuselage Length | 1284mm (50.6in) |
| CG | 115 - 120mm from the leading edge at the wing root |
| Motor | Tomcat TC2826-KV2200 |
| ESC | TC Skylord 80A ESC X2Pcs |
| Propeller | / |
| Servo | 9g X 8pcs |
| Elevator | Yes |
| Rudder | Yes |
| Ailerons | Yes |
| Flaps | Yes |
| Landing Gear | E retract |
| EDF | 12-blade, 70mm *2 |
| Floats | N/A |
| Tx Requirement | 6-Channel or above transmitter |
| Rx Requirement | 6-Channel receiver |
| Li-Po Battery | 22.2V 5200mAh 30C |
| Appr. Assembly Time | 1 hour |
| Aircraft Type | Jet/EDF |
| Pilot Level | experienced |
| Appr. Flight Time | 5min |














Copyright © 2009-2019 DetrumTech, Co,.Ltd All Rights Reserved