The Z3 series flight control is a product that combines electronics and computer technology, data processing technology, control theory, sensor technology, and communication technology into the flight field. With the application of various sensors, software updates and upgrades, through radio remote control technology, advanced flight control algorithms, rapid data analysis and processing, real-time voice broadcast, etc., it can assist aircraft in safer flight, reduce the technical threshold of flight, and make more Many people enjoy the fun of flying, thus entering a new era of fixed-wing intelligent flight.
Let's check out the new member of the Z3 flight control series, Z3-FPV, specially designed for FPV aircraft by DETRUM TECH R&D team!
Features
1,OSD Information Display Function: Real-time Monitoring of Flight Data
Through the built-in OSD, the plane altitude, speed, posture and distance can be shown on the screen.
When it cooperated with Detrum Blitz-DT9 Transmitter and RXC9M receiver, it can return real-time voltage, altitude, speed, attitude, distance, satellite signal and other information to the transmitter in real time, with voice broadcast and record the maximum & average value of information after the aircraft landed for analysis.
2,Independent PMU: Stable Power Supply Guarantee
The PMU supports 2-6S, can provide stable power supply (5V) for flight control, camera and other equipment, and can collect current, voltage and other information
3,One-click RTH & Fail Safe: The Guarantee of Safe Flight
Toggle the remote control RTH switch when required, the aircraft will maintain the current altitude(By default, when manually returning home, the aircraft will climb to 60 meters when the altitude is lower than 60 meters, and lower to 120 meters when it is higher than 120 meters.), and the autopilot will return to the take-off point side by side-waiting for you to regain control of the aircraft(The default circle radius is 50 meters). Parameters such as return speed and hovering radius can be set in the programming card according to the properties of the aircraft.
With out-of-control protection function (DSM, S.BUS receiver is activated automatically, PPM receiver needs to set out-of-control protection), when the aircraft flies out of the remote control range or the signal is bad, Z3-FPV flight control will automatically take over the aircraft, the height * keep 100 meters Fly back to the take-off point and circle (circling radius 50 meters) waiting for you to regain control of the aircraft.
*The above mentioned heights are relative to the take-off point
4,Compatible with Most Receivers on the Market
5,Main Control IC
32-bit high-performance ARM core processor, 6-axis MEMS gyro chipset, barometer.
6,Control Algorithm
Original airplane attitude stabilization algorithm and control algorithm. Support normal wing, fly wing, V-tail airplanes, and 3D planes.
7,Flying Mode
There are 5 modes: Gyro Off Mode(OFF), Normal Mode(normal), Auto-Recovery Mode(Safe), Aerobatic Mode(Aerobatic), Return to Home Mode(RTH). Different mode can be switched during flying.
8,Adjusting the Gain
Set the gain and other programmable items with 3in1 program card.
9,Firmware Upgrade
With USB upgrade function, manufacturers continue to update the function and upgrade firmware.
Technical Parameter
ITEM | DATA |
Main Control IC | 32-bit high-performance ARM core processor |
Built-in Sensor | 6-axis gyro, barometer |
Gyro Range | -2000dps~+2000dps |
Accelerometer Range | -4g ~ +4g |
Input Signal | PPM, Futaba S.BUS, DSM |
Output Signal | PWM(71.4Hz) |
Work Voltage Range | 4.8V~7.4V |
Work Temp | -20℃~70℃ |
Dimension | 36.5*29.4*12.6mm |
Weight | 12g |
Copyright © 2009-2019 DetrumTech, Co,.Ltd All Rights Reserved